Wei-Chang Li

Wei-Chang Li joined the Institute of Applied Mechanics at National Taiwan University in 2016 as an Assistant Professor. Prior to starting at NTU, he was a MEMS design engineer at mCube Inc., San Jose. He received the B.S. and M.S. degrees in electrical engineering from National Taiwan University, Taipei, Taiwan, in 2003 and 2005, respectively. He received the Ph.D. in electrical engineering from the University of California, Berkeley, in 2015. His research interest focuses on resonant microelectromechanical systems (MEMS) and includes vibro-impact system enabled technologies and zero-power mechanical signal processing/computing.
Chun-Pu Tsai (蔡淳樸)

Chun-Pu Tsai received the B.S. degree in Mechanical Engineering from Southern Taiwan University of Science and Technology, Tainan, Taiwan in 2016. He received the M.S. degree from Institute of Applied Mechanics, National Taiwan University in 2019 and is now pursuing his Ph.D. degree. His research topic is advanced MEMS resoswitch technology.
0611
Bo-Han Chen (陳柏翰)

Bo-Han Chen received the B.S. degree in Department of Bio-Industrial Mechatronics Engineering from National Chung-Hsing University, Taichung, Taiwan in 2019. He received the M.S. degree from Institute of Applied Mechanics, National Taiwan University in 2021 and is now pursuing his Ph.D. degree. His research topic is thermal error compensation in machine tools.
0226
Ting-Yi Chen (陳庭毅)

Ting-Yi Chen received the B.S. degree in Department of Aeronautics and Astronautics from National Cheng Kung University, Tainan, Taiwan in 2020. He is now studying at the Institute of Applied Mechanics, National Taiwan University for his Ph.D. degree. His research project is acoustic resoswitches.
0825
Shang-Yu Lin (林上裕)

Shang-Yu Lin received the B.S. degree in Department of Mechanical Engineering from National Chung Hsing University, Taichung, Taiwan in 2020. He is now studying at the Institute of Applied Mechanics, National Taiwan University for his M.S. degree. His research project is cutting force sensors for machine tool wear prediction.
0310
Pang-Hsiang Hung (洪邦祥)

Pang-Hsiang Hung received the B.S. and M.S. degree from National Taipei University of Technology, Taiwan in 2010 and 2012, respectively. He is now studying at the Institute of Applied Mechanics, National Taiwan University for his Ph.D. degree. His research project focuses on CNC machine tool servo and motion parameter tunning for contour error optimization.
0116
Nilabh Basu

Nilabh Basu earned a Bachelor of Technology (B.Tech) degree in Mechanical Engineering from A.K.T.U, Lucknow, India, in 2018. Subsequently, he completed a Master of Engineering (M.E.) degree in Control System Engineering, specializing in Electrical Engineering, at Jadavpur University, India, in 2020. Following this, he served as a New Product Development Engineer at Young Optics Inc., Hsinchu Science Park, Taiwan, until June 2022. Currently, he is pursuing a Ph.D. under the guidance of Professor Li, focusing on the fabrication and analysis of Quartz-based MEMS devices.
0212
I-Fei Chung (鐘一飛)

I-Fei Chung received the B.S. degree in Bachelor Degree Program in Ocean Engineering and Technology from National Taiwan Ocean University, Keelung, Taiwan in 2022. He is now studying at the Institute of Applied Mechanics, National Taiwan University for his M.S. degree. His research project is piezoelectric resoswitches.
0315
Cheng-Ming Lee (李承名)

Cheng-Ming Lee received the B.S. degree in Department of Mechanical Engineering from Asia Eastern University of Science and Technology, New Taipei, Taiwan in 2022. He is now studying at the Institute of Applied Mechanics, National Taiwan University for his M.S. degree. His research project is high bit-rate resoswitches.
0312
Wen-Tse Hsu (徐文澤)

Wen-Tse Hsu received the B.S. degree in Department of Mechatronic Engineering from National Taiwan Normal University, Taipei, Taiwan in 2022. He is now studying at the Institute of Applied Mechanics, National Taiwan University for his M.S. degree. His research project is power consumption optimization for machining processes.
0304
He-Chuan Hsu (許賀筌)

Ho-Chuan Hsu received the B.S. degree in Department of Mechanical Engineering from National Taipei University of Technology, Taipei City, Taiwan in 2022. He is now studying at the Institute of Applied Mechanics, National Taiwan University for his M.S. degree. His research project is sensor-embedded machining vises.
0820
Kai-Wei Lan (藍楷崴)

Kai-Wei Lan received the B.S. degree in Department of Mechanical Engineering from National Taiwan University of Science and Technology, Taipei, Taiwan in 2022. He is now studying at the Institute of Applied Mechanics, National Taiwan University for his M.S. degree. His research project is high-precision gyroscopes.
0716
Hsin-Che Lin (林信喆)

Hsin-Che Lin received the B.S. degree in Department of Civil Engineering from National Central University, Taoyuan, Taiwan in 2023. He is now studying at the Institute of Applied Mechanics, National Taiwan University for his M.S. degree. His research project is quartz resonator process development.
1128
Kai-Ti Huang (黃楷媞)

Kai-Ti Huang received the B.S. degree in Department of Civil Engineering from National Taiwan University, Taipei, Taiwan in 2023. She is now studying at the Institute of Applied Mechanics, National Taiwan University for her M.S. degree. Her research project is temperature compensated TMDs.
1026
Jian-Jun Lu (盧建均)

Jian-Jun Lu received the B.S. degree in Department of Aerospace and System Engineering from Feng Chia University, Taichung, Taiwan in 2023. He is now co-advised by Prof. Pei-Zen Chang and Prof. Wei-Chang Li at the Institute of Applied Mechanics, National Taiwan University for his M.S. degree. His research project is micro force sensors.
1026
Hsuan-Yu Kao (盧建均)
Hsuan-Yu Kao received the B.S. degree in Department of Mechanic Engineering from National Yang-Ming Chung-Tung University, Hsinchu, Taiwan in 2023. He is now studying at the Institute of Applied Mechanics, National Taiwan University for his M.S. degree. His research project is wireless sensor development.
1026
Alumni
01 Shih-Chuan Lu, MS 07/2018, now w/ Phison Electronics (群聯電子)
—CMOS-MEMS CC-Beam Metal Resoswitches for RF Receiver and Inertial Sensor Applications
02 Chun-Pu Tsai, MS 07/2019, now pursuing his PhD in the same lab
— A Study on the Influence of Nonlinearity on Stability of Micromechanical Resoswitches
03 Wun-Ruei Du, MS 07/2019, now w/ Mirle Automation
—A CMOS-MEMS Mode-Localized Resonator Based on a Tuned-Mass-Damper Structure for Mass Sensing Applications
04 Jia-Ren Liu, MS 07/2019, now w/ GUC (創意電子)
—A CMOS-MEMS Temperature-Compensated Plasmonically-Enhanced Sensing Platform for IR-Based Gas Analyzer Applications
05 Yen-Yu Liao, MS 11/2019, now w/ GUC (創意電子)
—A CMOS-MEMS Folded-Beam Comb-Driven Resoswitch-Based OOK/FSK Communication Receiver
06 Cheng-En Hsu, MS 11/2020, now w/ Wiwynn (緯穎科技)
—Zero-Bonding Packaging Technology for CMOS- MEMS Process Platform
07 Yun Yi, MS 07/2021, now w/ MediaTek
—Gap Narrowing for Capacitively-Transduced Micromechanical Vibro-Impact Resonators
08 Shih-Yuan Liu, MS 07/2021, now w/ SensorTek (昇佳電子)
—Contour-Plot Methodology for MEMS Inertial Sensor Design Optimization
09 Yu-Shu Lin, MS 08/2021, now w/ MediaTek
—An Integrated Piezoelectric Cutting Force Sensor for Turning Tools
10 Hsuan-Wei Wang, MS 08/2021, now w/ TSMC
—Quality Factor Enhancement Techniques for CMOS-MEMS Based Resonators
11 Hong-Sen Zheng, MS 09/2022, now w/ STARMEMS (星瑞半導體)
—Gap Narrowing for CMOS-MEMS Resonators via Constructive Utilization of Structural Stress
12 Dian-Yen Wu, MS 09/2022, now w/ GUC (創意電子)
—A CMOS-MEMS Resoswitch-based Wake-up Receiver
13 Pin-Chun Huang, MS 01/2023, now pursing her PhD in UC Irvine
—CMOS-MEMS Tuned-Mass-Damper (TMD) Based Mode-Localized Voltmeters
14 Yi-Hsuan Huang, MS 07/2023, now w/
15 I-Chieh Hsieh, MS 07/2023, now w/
—Frequency Temperature Compensation Technique for CMOS-MEMS Resonators Using Arc Beam Structures
16 Che-Yu Hsu, MS 07/2023, now w/ Nanya Tech.
17 Ting-Jui Liou, MS 07/2023, now w/ Moisturized Startup
—Reliability Improvement of Resoswitches Utilizing Electroless Nickel Plating
18 Chia-Hui Kuo, MS 07/2023, now w/
—Machine Tool Dynamic Analysis for High-Speed Precision Machining
19 Bing-He Chou, MS 07/2023, now w/
—Energy Consumption Prediction and Optimization for Three-Axis Machine Tool